Wiring method of christmas led rope lights
Welding method: suitable for LED strip light with low voltage electricity. First determine the positive and negative poles of the strip, and then use an electric soldering iron and solder wire to solder the wire to the copper patch of the strip. After soldering, use electrical tape or heat shrink tubing to protect the solder joint and avoid short circuits.
Terminal wiring method: suitable for 12V DC power supply led rope lights. Connect the two output wires of the DC power supply to the positive and negative terminals of the light strip, and then plug the power plug into the home AC power outlet.
Driver connection method: suitable for all lamp beads in series of led rope lights. It is necessary to connect the capacitor ballast constant current driver or the switching constant current driver, insert the two pins of the driver plug into the core of the two leads of the light strip according to the correct polarity, and then plug the power plug of the driver into the household AC power outlet.
Other wiring methods
Direct wiring method: suitable for connecting short led rope lights, connect each branch cable directly to the power cord, pay attention to the connection of anode and cathode.
Wiring method: It is suitable for long led rope lights, and it is necessary to add strip connectors in the middle to prevent the stability of a single power supply caused by excessive load current or long strip length.
Precautions
Make sure the power is turned off before performing any wiring operations to avoid the risk of electric shock.
Use suitable tools and materials, such as wire strippers, electrical tape, or heat shrink tubing.
Distinguish the positive and negative electrodes, and connect the positive electrodes to the positive electrodes and the negative electrodes to the negative electrodes.
For outdoor use, the led rope lights areinstalled in the way of card slot fixing, and the waterproof glue is used to enhance the waterproof effect of the connection point.