How to install garden stake light
There are several factors to consider when installing a garden stake light, including the type of garden stake light, voltage requirements, waterproofing treatment, etc
First of all, different types of garden stake light have different installation requirements. For example, garden lights and lawn lights usually use AC 220V voltage, and the special embedded parts of the lamps need to be fixed with concrete in advance, and the top height of the embedded parts is controlled at the soil level -150~-300mm. For waterscape lights, underwater spotlights, etc., it is necessary to use 220V to 12V safe voltage, there is a special transformer in the power distribution, and the cable connection is made of epoxy resin for waterproof treatment to ensure that there is no leakage. For the buried lamp, it is necessary to open the hole in the stone according to the specification requirements first, fix the PVC card groove of the lamp with cement when paving, and install the spotlight lamp holder 1 after the cement is good.
Secondly, during the installation process, it is necessary to pay attention to the risks of waterproof, moisture-proof, fireproof, and fire caused by excessive temperature during long-term high-load operation. The primary task of all cable connections is waterproofing, especially in places where there is a potential leakage, special attention is paid to the waterproofing of both ends. For the potential safety hazards of outdoor LED landscape lighting, it is necessary to pay attention to the following points, including waterproof, moisture-proof, fireproof, and long-term high-load operation of the temperature is too high and cause fire, etc., so we should also pay attention to the quality of the product when selecting to ensure safety 2.
Finally, the installation steps include preparation, determining the hole position of the hanging plate, drilling the hole and pressing the expansion screw hanging plate, connecting the terminal block of the control line and the neutral line, adjusting the angle of irradiation to distribute the light evenly, gently putting the lamp into the fixed position, adjusting the horizontal angle and tightness to achieve the effect, and testing the lighting effect with electricity. Once the whole process is complete, it can work normally. It is important to ensure that all wires are wrapped with tight insulation to prevent problems such as leakage and short circuits2.
To sum up, the installation of garden lights needs to comprehensively consider the type of garden lights, voltage requirements, waterproof treatment, and specific installation steps and precautions to ensure that the installation process is safe and correct to achieve the expected lighting and decoration effect.